Home ProductsSurface Mount Fuse

Aolittel Technology Co.,Ltd

Certification
Good quality Auto Fuse Holder for sales
Good quality Auto Fuse Holder for sales
Work as spec'd. would buy again.

—— Frank Kolodzeike

Great product - performed as expected

—— Robert Rossi

Great value..

—— Brianna Hill

I'm Online Chat Now

3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved

China 3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved supplier
3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved supplier 3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved supplier 3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved supplier 3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved supplier

Large Image :  3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved

Product Details:

Place of Origin: CHINA
Brand Name: Ao littel
Certification: UL,CAS,RoHS,Reach
Model Number: 12 100 1.5

Payment & Shipping Terms:

Minimum Order Quantity: 3000 Pieces
Price: Negotiable
Packaging Details: Tape in reel ,3000 fuses on 8mm tape-and-reel on a 7 inch (178mm) reel per EIA Standard RS481
Delivery Time: 10 Workdays
Payment Terms: T/T
Supply Ability: 8,000,000 Pieces Per Month
Contact Now
Detailed Product Description
Name: SMD Chip Encapsulation Surface Mount Fuses Fuse Type: Fast Blow
Rated Current: 1.5 A Voltage Rating AC: 32VAC
Voltage Rating DC: 63VDC Fuse Size / Group: 1206 (3216 Metric)
Minimum Operating Temperature: - 65 C Maximum Operating Temperature: + 125 C
Qualification: AEC-Q200 Packaging: Reel
Length: 3.2 Mm Width: 1.6 Mm
Height: 0.75mm Interrupt Rating: 50 Amps
Factory Pack Quantity: 3000 Pieces Unit Weight: 0.002116 Oz

 
3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach Approved
 
 
Benefit
 
Small size with high current ratings
Excellent temperature stability
High reliability and resilience
Strong arc suppression characteristics
 
 
Environmental data
 
• Thermal Shock: MIL-STD-202, Method 107, Test Condition B (-65 °C to +125 °C)
• Vibration: MIL-STD-202, Method 204, Test Condition C (55 Hz - 2 kHz, 10 G)
• Moisture Resistance: MIL-STD-202, Method 106,10 day cycle
• Solderability: ANSI/J-STD-002, Test B
• Additional resistance to solder heat test: MILSTD-202G Method 210F Condition A
• Operating Temperature: -55 ºC to +125 ºC
• AEC-Q200 qualified (250 mA to 7 A)
 
______________________________________________________________________________Epoxy Coated Photocell 11mm Diameter Photoresistor Light Sensor GM11528 With Light Resistance 10-20 KOhm Download________
 
 
General 
 
Fast-acting fuses help provide overcurrent protection on systems using DC power sources up to 63VDC. The fuse's monolithic,multilayer design provides the highest hold current in the smallest footprint, reduces diffusion-related aging, improves product reliability and resilience, and enhances high temperature
performance. This helps facilitate the development of more reliable, high-performance consumer electronics such as laptops, multimedia devices, cell phones, and other portable electronics.
 
 
Features
 
Multilayer monolithic structure with glass ceramic body and silver fusing element
Silver termination with nickel and pure-tin solder plating,
providing excellent solderability
AEC-Q200 qualified (250 mA to 7 A)
Fast-acting surface mount fuse
Ratings up to 30 amps
Excellent temperature and cycling characteristics
Compatible with reflow and wave solder
RoHS compliant
High temperature performance
-55°C to +125°C operating range
 
 
Soldering method
 
• Wave Immersion: 260 °C, 10 sec max.
• Infrared Reflow: 260 °C, 30 sec max.
 
 
Packaging
 

Package data
Part NumberDescription
12 100 X3000 fuses on 8mm tape-and-reel on a 7 inch (178mm) reel per EIA Standard RS481

 
 
Application
 
Circuit Protecting in LCD monitors, PC cards, disk drives, portable communication products, PDAs, digital cameras, DVDs, TVs, cell phones, rechargeable battery packs, battery chargers, etc.
 
 
Material Specifications
 

Construction Body MaterialCeramic
Termination MaterialSilver, Nickel, Tin
Fuse ElementSliver
Terminal Strength

Hanging test:
0603: 0.5kg 30 seconds;
1206 1.5kg, 30 seconds;
0402 part types meet 2-pound push test

 
 
Reliability Tests
 

No.TestRequirementTest ConditionTest reference
1Soldering heat resistance

DCR change ≤±10%
No mechanical damage

One dip at (260±5)℃ for (5±1) sec

MIL-STD-202
Method 210

2SolderabilityMinimum 95% coverageOne dip at (235±5)℃ for (5±1) sec

MIL-STD-202
Method 208

3Thermal shock

DCR change ≤±10%
No mechanical damage

1000 cycles between -45 ℃ and +125℃Refer to Ao littel Standard
4Moisture resistance

DCR change ≤±15%
No mechanical damage

10 cycles

MIL-STD-202
Method 106

5Mechanical vibration

DCR change ≤±10%
No mechanical damage

0.4" D.A. or 30 G between 5- 3000 Hz

MIL-STD-202
Method 204

6Mechanical shock

DCR change ≤±10%
No mechanical damage

Fall from 1 m height of the floor 10 timesMIL-STD-202 Method 213
7Terminal strength

DCR change ≤±10%
No mechanical damage

30 sec. hanging for 1206 (1.0kg) and 0603 (0.5KG)Refer to Ao littel Standard
8LifeNo electrical "opens" during testing voltage drop change shall be less than±20% of initial value80% Rated current ambient temperature +25℃ to +28 ℃,2000 hoursRefer to Aolittel Standard
9BendingNo electrical "opens" during testing2 mm bending ,more than 5 secondsRefer to Ao littel Standard

 
 
Cautions and warnings:
 
1,Handling CHIP FUSE must not be dropped. Chip-offs must not be caused during handling of FUSEs. Components must not be touched with bare hands. Gloves are recommended. Avoid contamination of fuse surface during handling.
2,Soldering Use resin-type flux or non-activated flux. Insufficient preheating may cause ceramic cracks. Rapid cooling by dipping in solvent is not recommended. Complete removal of flux is recommended.
3,Mounting  Electrode must not be scratched before/during/after the mounting process.  Contacts and housings used for assembly with fuses have to be clean before mounting.  During operation, the fuse’s surface temperature can be very high (ICL). Ensure that adjacent components are placed at a sufficient distance from the fuse to allow for proper cooling of the fuses.  Ensure that adjacent materials are designed for operation at temperatures comparable to the surface temperature of the fuse. Be sure that surrounding parts and materials can withstand this temperature.  Avoid contamination of fuse surface during processing.
4,Operation Use fuses only within the specified operating temperature range.  Environmental conditions must not harm the fuses. Use fuses only in normal atmospheric conditions.  Contact of chip fuses with any liquids and solvents should be prevented. It must be ensured that no water enters the chip fuse (e.g. through plug terminals). For measurement purposes (checking the specified resistance vs. temperature), the component must not be immersed in water but in suitable liquids (e.g. Galden).  Avoid dewing and condensation.
 
 
Notice: Specifications of the products displayed herein are subject to change without notice. We assume no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Aolittel's terms and conditions of sale for such products, Aolittel assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Wayon products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. Specifications are subject to change without notice.
 

Contact Details
Aolittel Technology Co.,Ltd

Contact Person: eric.lye

Send your inquiry directly to us (0 / 3000)

Auto Blade Fuse

ISO8820-3 Standard BFMN-1225 Automotive Car ATM Mini Blade Fuse 25A 32V Natural 11mm For In-line Fuse Holder Adapter

Generic High Current Auto Blade Fuse ANL Automotive Bolt On Fuse 32V 20A-500A For Lift Trucks Car Audio Battery

Low Back Profile Micro Auto Car Mini Blade Fuse 30A 58V Green For Infiniti Subaru Acura Mazda Automotive

DIN72581 Standard GBC Zinc Alloy Bakelite 6x24mm European Auto Fuse 32VDC 5A-40A For EU Automotive Car Auto Blade Fuses

Auto Fuse Holder

Customized Mini ATM APM Auto Blade Fuse Holder Add-a-circuit Fuse Adapter 32V For Japanese Car Truck Motorcycle SUV DIY

Red Wire Black Plastic Square Shell Cap Wired Inline Auto Fuse Holder Box MT205 For Mini Car Blade Fuse

20A PCB Vertical Mount Car Fuse Holder Block Spring Brass Fuse Clip For 19mm Automotive Standard ATC ATO Auto Blade Fuse

Standard PCB Mount Quick Insert Nylon Stackable Medium ATC ATO Auto Fuse Holder Block For Plug-in Automotive Fuse 1A-30A

Surface Mount Fuse

Littelfuse 0476 Replacement 6125 2410 1808 Wire In Air Time Delay Suface Mount Fuse 250V 2A Slow Blow Lead Gold Plated

Littelfuse 467 Series Cross 0603 Size Thin Film Very Fast-Acting Surface Mount Fuses With Rating 250mA-8A 63VDC 32VDC

Sartfuse S1032-F Cross NANO 10.25x3.2 mm R1032 Series High Current Fast-Acting Surface Mount Fuse 250Vac 50mA-15A

Bourns SF-0603SP200-2 Cross 1608 Metric SMD SingleFuse Slow Blow Surface Mount Fuse 2A 32VDC For Overcurrent Protection

Request A Quote

E-Mail | Sitemap

Privacy Policy China Good Quality Auto Blade Fuse Supplier. Copyright © 2018 - 2019 aolittel.com. All Rights Reserved.